As a belly dancer, a nerd, and a crafter/seamstress, my interests tend to intersect a lot. In this post I will show you the costume I made for Bad Weather Burlesque’s FAN-tastic show in December. It was FAN-tastic indeed! If you’d like to see how I made my prop mallet you can see it on my craft-cosplay blog here.
Harley has had a number of different costumes since she debuted on the Batman: The Animated Series in 1993. I’ve noticed that as the years have gone by she has lost a lot of her clothing, but that’s another discussion all together. I’m currently hooked on Harley Quinn’s Little Black Book. I was looking for something a bit in between classic Harley Quinn and her modern costume, with a belly dance twist.
Here’s the complete costume:
From the top, I did my hair in high pigtails like she does in the current comic, but my hair is all red and I wasn’t going to bother with a wig or dye my hair so there you have it.
I made the collar pattern just measuring a circle that would fit comfortably around my neck and adding several triangles.
I cut a base out of white felt and the fabric on top is a scrap I had leftover from another project. I used heavy duty Heat n’ Bond to hold them together. I just cut out the center circle, and securely pinned the back, but you could add a snap or Velcro® or what have you.
For the shrug I just traced out a shrug I already had and like a lot but was the wrong color. It’s only 4 pieces to stitch together, no problem. I used the black and red striped fabric because I already had it. If you have a favorite shrug you love try making your own pattern. It’s easier than you think.
The bra was made using the basic bra covering technique that I’ve blogged about before. I made appliqués by creating a square with a felt base and covered with my bra and pants fabric and bonded with Heat n’ Bond just like the collar. From there I traced out square patterns with a pen and beaded and beaded and beaded. I cut out the empty space, since Harley typically has a three-diamond pattern on her costume. I then used beads and sequins in between the beaded diamonds and over the edges to secure the applique. I’m not going to go over the technique here, because that would be a whole other post, and Davina can explain it better than I. I made a smaller appliqué for the bra and a larger one for the pants.
The hip scarf is super simple – triangle with long rectangles to tie it on. It is lined with black fabric and covered in a sparkly black sheer fabric, which I chose because it was just lying around my craft room. I was pretty sure there was a free pattern somewhere online for this, but for the life of me I cannot find it. I may do another post on that. In the meantime, Simplicity™ has one. Special thanks to my friend Brenda, who just happened to have a whole bag of really nice tassels and was kind enough to let me have some.
The pants were a little extra challenge to figure out, but easy in the end. I don’t believe in reinventing the wheel. I picked up McCalls pattern M7198 for yoga pants and embellished the bottom part of the legs. I looked at some flare pants I already had and noticed that there is about a 30° angle on the flares from the hem. This is so the flares don’t become longer than the center part of the hem and drag on the ground. If you angle up everything will settle at the same hem line. So I measured out some triangles starting from my knee to the hem, and then measured out how much flare I wanted. I left the outer seam open from the knee to the hem so you can see a little leg when I kick. That is totally optional of course. This fabric was a spandex blend and therefore won’t fray, so I didn’t actually have to finish the edges. It was pretty easy in the end, and I’ll probably reuse this pattern a lot.
My shoes are just black ballet flats. I never dance without shoes, especially in a club. There is just too much risk of injury.
So that’s it! I hope this may be helpful to your own costume plans. Let me know in the comments if you love Harley Quinn. 🙂